Feeding Unit : 1: Lead edge feeder :
1)Four-line types lead edge feeder, feeding stable and accuracy.
2) Left and right side baffle, front baffle electric moving, And set with uniform cardboard function.
3) Feeding rubber roller use elastic floating institutions, reduce the damage of feeding roller to the cardboard.
4) Equipped with skip cardboard feeding function. Counter shows the production quantity, Speed counter show the producing speed.
5) With brush dedusting high-pressure vacuuming device , can clear the impurities on the cardboard, improve the printing quality.
Printing unit :
1)Use plate-hanging organization. Load and unload the printing plate can use foot switch or electric control positive and negative rotating.
2) The distance of Ceramic anilox and rubber roller is electric adjusting.
3) Equipped with air pressure type auto go up and down device cooperating with feeding system(Feeding, Anilox roller go down to touch the printing plate, stop feeding,Ceramic anilox go up and separate with the printing plate).
4) Printing phase use frequency converter, touch screen control and electric digital 360 degrees adjusting(running and stopping are both adjustable).
5) Have wiping printing plate memory function.
6) Printing roller axial electric moving, left and right adjusting distance are ±7mm.
7) Transmission roller, printing & pressing roller, rubber roller, Ceramic anilox roller, distance adjusting use self-locking organization.
Slotting unit :
1) Slotting phase use frequency converter, touch screen control and electric digital 360 degrees adjusting (running and stopping are both adjustable) and with reset function, and can store orders.
2) Use single roller double knives slotting, creasing wheel and slotting knife plate are same size, creasing effect is better. 3) Up creasing roller packed with rubber cushion, will not damage cardboards.
4) Creasing wheel, slotting tool apron sides way synchronous adjusting, electric control.
5)Slotting knives use alloy steel material, after heat treating, and grinding tooth form, knife thickness is 7mm.
Die-cutting Unit ：
1.The side to side 50mm mechanical spiral movement device adopted on the anvil drum.
2.The die drum transverse movement can prolong the service life of anvil drum.
3.Die cutting phase is digitally controlled by motor and PLC.
4.The die cutting cylinder lateral register is digitally controlled by motor and PLC, rang about ±10mm.
5.Motorized caliper adjustment between anvil roll and die drum.
6.Self-locking system is adopted on feeding rolls.
7.Anvil Rubber roller speed compensation adopted independent motor for driving to control the rubber roller speed, the compensation scopes ±3mm.
8.Anvil trimmer to keep surface of the anvil covers flat and smooth.
Online gluer machine ：
Lower folding machine: use the lower insert paper to ensure the quality of the carton, not because of the rigidity or bending of the cardboard.
PLC program control, automatic adjustment according to the input order parameters.
Equipment with secondary indentation and right institution, its p erformance is stable and reliable, such as A flute corrugated high 3.5 4.0mm, stare blankly number 41 + 3, stare blankly high is higher, stare blankly after folding, counterpart from seam spacing sizes. In this case, the indentation repair mechanism can effectively control the size of the folding gap.
The right Angle sorting mechanism is different from ordinary right-angle organization, and my equipment is clean and stable at right angles, and the operation is stable and reliable.
Even if the slotting pressure line is not good, through our research and development, we can effectively control the opening barrier, the size is even, and the gap size can be adjusted arbitrarily. The curve wheel designed by our company is arranged on both sides of the folding arm with four rows of rectangular plate.
The second arrangement of squaring device can completely solve the scissors. For example, using quick-drying glue or white latex to solve the speed of scissors, the glue does not dry to a certain extent, the scissors can not be solved, the speed is slow adhesion. Therefore, other carton box gluing machines have high requirements for glue, and the production volume can not meet the requirements. But this machine adopts secondary finishing, no requirement for glue, and completely solve the scissors. Thus greatly improve the qualified rate of products.
The machine adopts the adhesive of Taiwan's imported spray gun, and it is evenly coated with glue.
Features: simple operation, quick adjustment, PLC control, all electric adjustment.
